About six months ago I gave my friend, Clark, an old guillotine paper cutter that I wasn't using anymore. He's a freelance artist by trade, and recently he has gotten into desktop publishing as a hobby and to present his work to potential customers.
So today he called me for advice because he thinks he has "outgrown" the old cutter - or trimmer - depending on who you ask. He's spending more time with different types of printing lately, and doing more detailed and difficult work. He wants something that can handle larger volumes, higher quality paper, and possibly other materials such as leather.
The cutter that I gave him (one of those old, warped wood based guillotines) isn't cutting perfectly straight and isn't wide enough for some of his paper anyway.
I'm writing here the advice that I gave him over the phone today, because I think it applies to nearly anyone who may have "outgrown" a guillotine cutter.
I told him to look into stack cutters, and my top choices right now are both from QCM - the QCM 8200M and the QCM 8700M heavy duty paper cutters. Both have a safety lock on the blades, so they won't make any unwanted cuts on you or the paper. And, they're both made with galvanized steel bases.
I told Clark to get the QCM 8700M online, and not to pay more than $600 or so for it. But for most people I would recommend the 8200M because it can be found online for under $300. Clark frequently needs to trim paper wider than 12 inches, which is essentially the only difference between the two.
The 8200M will trim over 350 sheets of 20 lb. paper at once, but only up to 12 inches wide. The 8700M weighs a little bit more, has about the same 350 sheet capacity for stack cutting, and can handle paper up to 17 inches wide. So if you rarely need to cut anything over 12 inches, you can't beat the 8200M at almost half the price.
With either of these stack cutters, they're roughly the same price as a guillotine, but can handle about 10 times the amount of paper at a time - that's 350 sheets compared to 30 or so sheets at once with a guillotine of equal cost.
I have one of the 1200E cutters, I bought it for my school's office and it has lasted! I love it, and would highly recommend it.
Posted by: Jena | December 21, 2007 at 03:21 PM
Do you know how deep the paper cutter cuts?
Posted by: Jason Sacks | January 15, 2008 at 09:10 PM
Jason -
The QCM 1200E & the 1700E both have a cutting capacity of 1.5 inches or 280 sheets of 20 lb. paper at a time.
The only difference between the two is in the lengths they will cut - up to 12 inches for the 1200E and up to 17 inches for the 1700E.
I'd get the 1700E if there's a chance you'll be cutting larger format documents.
-Bob
Posted by: Robert Office | January 16, 2008 at 08:36 AM
I am really pleased to post my comment on this blog . It helped me with ocean of knowledge so I really belive you will do much better in the future . Good job web master .
Posted by: paper shredders | October 27, 2008 at 10:55 PM
Can anyone tell me the difference between the
QCM-1700E Paper cutter and QCM-8700M Stack cutter? I tried pulling it up from the QCM website, but it is currently down.
Posted by: Katie Tang | October 01, 2009 at 03:00 PM